Martensitic stainless steel, often used in knives, tools and equipment that require high hardness, wear resistance and corrosion resistance.
一．Chemical composition
DSM | Japanese Standard | USS | European Standard | C % | Si % | Mn % | P % | S % | Ni % | Cr % | Mo % | Other % |
7Cr13Mo |
|
|
| 0.65-0.75 | 1.00 | 1.00 | 0.040 | 0.030 |
| 12.50-14.00 | 0.05-1.0 | V:0.05-0.2 |
X65CrMo14 |
|
| 1.4109 | 0.60-0.75 | 1.00 | 1.00 | 0.045 | 0.030 |
| 13.00-15.00 | 0.50-0.60 |
|
8Cr14Mov |
|
|
| 0.75-0.8 | 0.80 | 0.20-0.80 | 0.030 | 0.040 |
| 13.50-14.50 | 0.40-0.50 | V:0.10-0.30 |
9Cr18MoV(102Cr17MoV) |
|
|
| 0.95-1.10 | 0.80 | 0.80 | 0.040 | 0.030 | 0.60 | 16.00-18.00 | 0.40-0.70 |
|
二. Application
7Cr13Mo
Application areas: 7Cr13Mo is a high-hardness, high-wear-resistant martensitic stainless steel with good corrosion resistance and wear resistance.
Common applications: Mostly used in the manufacture of medical devices (such as scalpels, scissors), high-end tableware, razor blades, and knives that require high hardness and corrosion resistance.
X65CrMo14
Applications: X65CrMo14 is a chromium-molybdenum stainless steel with high strength, good corrosion resistance and wear resistance, and is often used in situations where high durability is required.
Common applications: Widely used in knives, scissors, medical equipment, food processing equipment, and other precision parts that require high hardness and high toughness.
8Cr14MoV
Application areas: 8Cr14MoV stainless steel is often used to manufacture mid-to-high-end knives due to its good wear resistance, corrosion resistance and processing performance.
Common applications: Mainly used for kitchen knives, outdoor knives, daily utility knives, etc. These knives need to have both sharpness and durability.
9Cr18MoV
Application areas: 9Cr18MoV is a high-chromium, high-carbon martensitic stainless steel with extremely high hardness and good corrosion resistance after quenching.
Common applications: Widely used in high-end razor blades, precision bearings, medical devices (such as scalpels), high-end knives, and some mechanical parts with high corrosion resistance requirements.
